RE: NI PCI-6025E

With a clean recomile, I am not getting 
MITE:0xdf001000 mapped to d0903000 DAQ:0xd002000 mapped to d0905000
 ( irq = 5 ) 8255 support not configured -- disabling subdevice

I am using comedi 1.0.0 which in one of the files says the subdevice is
compile now into the driver.  So what do i need to do to configure the 8255
on my NI pci-6025e board?   Closest thing I can find on the mailing list is
from May 2000 which says:
<QUOTE>
Did you select option "Generic 8255 support" when you compile comedi?

If not, you must run again "make config" and turn 8255 support on
and recompile.
</QUOTE>

But with the ./configure in the comedi does not give you any options like
that (at least I did not) and you can not do a 'make config' in that
directory.

-----Original Message-----
From: David Schleef [mailto:ds_at_schleef.org]
Sent: Wednesday, August 27, 2003 18:22
To: Ford, Ingi A
Cc: 'comedi_at_comedi.org'
Subject: Re: NI PCI-6025E


On Wed, Aug 27, 2003 at 05:45:02PM -0400, Ford, Ingi A wrote:
> I am using the comedi driver for my National Inst. card, which has 32 DIO
> points.  Reading through the documentation and a google search through the
> old mail messages, I still could not find how to compile ni_pcimio to
> require the 8255 to get the other 24 DIO points.  Due to the firewalling,
It
> will be difficult to get the files with the actual results, I will retype
> what I think is important here:

> I read through the driver.txt file and it said you had to compile the 8255
> driver into the ni_pcimio, but it did not say how and that is what I am
> assuming I am missing.

The 8255 digital lines are on subdevice 3.



dave...

Received on 2003-08-28Z16:59:02