- From: Johan De Clercq <johan.declercq_at_UGent.be>
- Date: 09 Apr 2004 16:53:38 +0200
Hey,
I am trying to get a PCI Ni6036E card configured on an old computer (AMD
k6) with Linux Libranet 2.8.1 Debian but untill now no succes.
The installation of comedi went well untill
/sbin/modprobe comedi
comedi_config /dev/comedi0 ni_pcimio
I get this info:
Configure failed! : Input/output error
> Check kernel log for more information
> Possible reasons for failure:
> Driver not found
I checked with windows NT4.0 the hardware was OK.
Tried changing the position of the card in the slots gave no difference.
Do somebody have an idea what can be the reason of the configure
failure.
I find in the kern.log
PCI: Unable to reserve I/O region #1:80_at_6500 for device 00:13.0
The PCI-card has the device nr 17 so I think everything alright.
The PCI-list gives no I/O address for National instruments card but when
I look under Windows NT they also do not mention an I/O adress so I
think OK.
I suppose I/O address is given by BIOS or by the kernel.
Is it possible to force an I/O address to a PCI card or did I made a
kernel-configure error somewhere ?
maybe the output of "dmesg" and "cat /proc/pci" give more info about
what I did wrong.
Linux version 2.4.24 (root_at_pincho) (gcc version 3.2.3 20030316 (Debian
prerelease)) #4 SMP Wed Apr 7 15:07:29 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000004000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
64MB LOWMEM available.
On node 0 totalpages: 16384
zone(0): 4096 pages.
zone(1): 12288 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 97 and too old
You can enable it with acpi=force
Kernel command line: root=/dev/hdb1 ro
No local APIC present or hardware disabled
Initializing CPU#0
Detected 233.867 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 466.94 BogoMIPS
Memory: 61592k/65536k available (1607k kernel code, 3556k reserved, 449k
data, 304k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After generic, caps: 008001bf 008005bf 00000000 00000000
CPU: Common caps: 008001bf 008005bf 00000000 00000000
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After generic, caps: 008001bf 008005bf 00000000 00000000
CPU: Common caps: 008001bf 008005bf 00000000 00000000
CPU0: AMD-K6tm w/ multimedia extensions stepping 02
per-CPU timeslice cutoff: 183.22 usecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfb110, last bus=0
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Installing knfsd (copyright (C) 1996 okir_at_monad.swb.de).
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
eth0: DC21041 at 0x6500 (PCI bus 0, device 19), h/w address
00:80:c8:e4:3c:41,
and requires IRQ9 (provided by PCI BIOS).
de4x5.c:V0.546 2001/02/22 davies_at_maniac.ultranet.com
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
PCI: Found IRQ 9 for device 00:13.0
PCI: Unable to reserve I/O region #1:80_at_6500 for device 00:13.0
PCI: Unable to reserve I/O region #1:80_at_6500 for device 00:13.0
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 28M
agpgart: no supported devices found.
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] Initialized radeon 1.7.0 20020828 on minor 1
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: Conner Peripherals 1080MB - CFS1081A, ATA DISK drive
hdb: WDC AC26400R, ATA DISK drive
blk: queue c03a2380, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03a24c8, I/O limit 4095Mb (mask 0xffffffff)
hdd: FX600S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 2114180 sectors (1082 MB), CHS=524/64/63, DMA
hdb: attached ide-disk driver.
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: host protected area => 1
hdb: 12594960 sectors (6449 MB) w/512KiB Cache, CHS=784/255/63, UDMA(33)
hdd: attached ide-cdrom driver.
hdd: ATAPI 6X CD-ROM drive, 256kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1
hdb: hdb1 hdb2
I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 7
Linux I2O PCI support (c) 1999 Red Hat Software.
i2o: Checking for PCI I2O controllers...
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
I2O Block Storage OSM v0.9
(c) Copyright 1999-2001 Red Hat Software.
i2o_block: Checking for Boot device...
i2o_block: Checking for I2O Block devices...
I2O LAN OSM (C) 1999 University of Helsinki.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,65)) ...
for (ide0(3,65))
ide0(3,65):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 304k freed
Adding Swap: 128516k swap-space (priority -1)
eth0: media is TP.
cdrom: This disc doesn't have any tracks I recognize!
comedi: version 0.7.68 - David Schleef <ds_at_schleef.org>
Available NI device IDs: 0x2890
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 430TX - 82439TX MTXC (rev 1).
Master Capable. Latency=32.
Bus 0, device 7, function 0:
ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 1).
Bus 0, device 7, function 1:
IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 1).
Master Capable. Latency=32.
I/O at 0xf000 [0xf00f].
Bus 0, device 7, function 2:
USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 1).
IRQ 11.
Master Capable. Latency=32.
I/O at 0x6400 [0x641f].
Bus 0, device 7, function 3:
Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 1).
IRQ 9.
Bus 0, device 17, function 0:
Class ff00: PCI device 1093:2890 (National Instruments) (rev 0).
IRQ 10.
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xe3001000 [0xe3001fff].
Non-prefetchable 32 bit memory at 0xe3002000 [0xe3002fff].
Bus 0, device 19, function 0:
Ethernet controller: Digital Equipment Corporation DECchip 21041
[Tulip Pass 3] (rev 33).
IRQ 9.
Master Capable. Latency=96.
I/O at 0x6500 [0x657f].
Non-prefetchable 32 bit memory at 0xe3000000 [0xe300007f].
Bus 0, device 20, function 0:
VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2
Model 64/Model 64 Pro] (rev 21).
IRQ 11.
Master Capable. Latency=32. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xe2000000 [0xe2ffffff].
Prefetchable 32 bit memory at 0xe0000000 [0xe1ffffff].
Thanks in advance.
Johan De Clercq
johan.declercq_at_UGent.be
Received on 2004-04-09Z13:53:38