Re: Ugly output when calibrating NI_ATMIO_64E_3

From: Juan Pablo Carbajal <desalta_at_hotmail.com> · Date: Mon, 30 Aug 2004 09:02:41 -0300

What I understand from your answer is that I must disable the isapnp.cfg and 
don´t run isapnp.
(i have the cvs version). Do I run comedi_config indicating all the 
parameters (base adress, irq, dma) or just the base adress?

I get many other things from the calibration, i send the complete output 
now:

WARNING: unknown eeprom address for reference voltage
correction.  This might be fixable if you send us an eeprom dump
(see the demo/eeprom_dump program).
Warning: device may not be not fully calibrated due to insufficient 
information.
Please file a bug report at https://bugs.comedi.org/ and attach this output.
This output will also allow comedi_calibrate to execute more
quickly in the future.
Forcing option: --verbose
Forcing options: --reset --dump --no-calibrate --no-results
Id: comedi_calibrate.c,v 1.92 2004/03/29 01:34:15 fmhess Exp
Driver name: ni_atmio
Device name: at-mio-64e-3
Id: ni.c,v 1.128 2004/07/24 21:27:05 fmhess Exp
Comedi version: 0.7.68
ai, bipolar zero offset, low gain
reading 0.010278(93), target 0
caldac[4] gain=-8.230(13)e-4 V/bit S_min=4.09251 dof=14
caldac[8] gain=-7.7(13)e-6 V/bit S_min=0.615713 dof=14
ai, bipolar zero offset, high gain
reading 1.3565(56)e-4, target 0
caldac[4] gain=-4.1225(76)e-6 V/bit S_min=5.38809 dof=14
caldac[8] gain=-7.7950(77)e-6 V/bit S_min=3.49142 dof=14
ai, bipolar voltage reference, low gain
reading 5.007173(91), target 5
caldac[2] gain=-4.789(13)e-4 V/bit S_min=12.2773 dof=14
caldac[4] gain=-8.247(13)e-4 V/bit S_min=4.17433 dof=14
caldac[8] gain=-7.3(12)e-6 V/bit S_min=0.672316 dof=14
ai, unipolar zero offset, low gain
reading 0.025288(98), target 0.002442
caldac[4] gain=-5.9131(84)e-4 V/bit S_min=45908.7 dof=14
caldac[8] gain=-7.7(13)e-6 V/bit S_min=0.997095 dof=14
caldac[12] gain=-6.6389(80)e-4 V/bit S_min=72718.6 dof=14
ai, unipolar zero offset, high gain
reading 2.1003(58)e-4, target 1.221e-05
caldac[4] gain=-3.3793(56)e-6 V/bit S_min=16987.2 dof=14
caldac[8] gain=-5.4315(48)e-6 V/bit S_min=132665 dof=14
caldac[12] gain=-3.7602(53)e-6 V/bit S_min=30127 dof=14
ai, unipolar voltage reference, low gain
reading 5.021930(91), target 5
caldac[2] gain=-4.780(13)e-4 V/bit S_min=13.4927 dof=14
caldac[4] gain=-8.252(13)e-4 V/bit S_min=1.88965 dof=14
caldac[8] gain=-7.6(12)e-6 V/bit S_min=0.973303 dof=14
caldac[12] gain=-9.591(13)e-4 V/bit S_min=4.48188 dof=14
ao 0, zero offset, low gain
reading 2.118(91)e-3, target 0.002442
caldac[4] gain=-8.225(13)e-4 V/bit S_min=10.5716 dof=14
caldac[6] gain=-8.202(13)e-4 V/bit S_min=10.1274 dof=14
caldac[8] gain=-7.1(13)e-6 V/bit S_min=0.340649 dof=14
caldac[10] gain=-1.193(13)e-4 V/bit S_min=2.34122 dof=14
ao 0, reference voltage, low gain
reading 7.996094(88), target 8.00244
caldac[2] gain=-7.721(13)e-4 V/bit S_min=12.2146 dof=14
caldac[4] gain=-8.297(13)e-4 V/bit S_min=16.5237 dof=14
caldac[6] gain=-8.272(13)e-4 V/bit S_min=12.7404 dof=14
caldac[8] gain=-7.7(13)e-6 V/bit S_min=0.571936 dof=14
caldac[10] gain=-2.202(13)e-4 V/bit S_min=5.47642 dof=14
caldac[14] gain=-1.549(13)e-4 V/bit S_min=3.63988 dof=14
ao 0, linearity (mid), low gain
reading 3.998984(92), target 4.00244
caldac[2] gain=-3.854(13)e-4 V/bit S_min=6.63435 dof=14
caldac[4] gain=-8.302(13)e-4 V/bit S_min=6.86397 dof=14
caldac[6] gain=-8.284(13)e-4 V/bit S_min=8.08147 dof=14
caldac[8] gain=-7.6(13)e-6 V/bit S_min=0.930197 dof=14
caldac[10] gain=-2.077(13)e-4 V/bit S_min=9.29334 dof=14
caldac[14] gain=-7.75(13)e-5 V/bit S_min=1.90504 dof=14
ao 1, zero offset, low gain
reading 1.927(94)e-3, target 0.002442
caldac[1] gain=-1.205(13)e-4 V/bit S_min=1.30902 dof=14
caldac[4] gain=-8.215(13)e-4 V/bit S_min=8.13955 dof=14
caldac[8] gain=-7.3(13)e-6 V/bit S_min=1.73302 dof=14
caldac[9] gain=-8.219(13)e-4 V/bit S_min=8.20718 dof=14
ao 1, reference voltage, low gain
reading 7.994887(93), target 8.00244
caldac[1] gain=-2.222(13)e-4 V/bit S_min=5.43596 dof=14
caldac[2] gain=-7.723(13)e-4 V/bit S_min=17.8751 dof=14
caldac[4] gain=-8.297(13)e-4 V/bit S_min=8.28603 dof=14
caldac[5] gain=-1.563(13)e-4 V/bit S_min=5.33805 dof=14
caldac[8] gain=-7.7(12)e-6 V/bit S_min=1.11762 dof=14
caldac[9] gain=-8.296(13)e-4 V/bit S_min=11.7433 dof=14
ao 1, linearity (mid), low gain
reading 3.997730(92), target 4.00244
caldac[1] gain=-2.102(13)e-4 V/bit S_min=9.39499 dof=14
caldac[2] gain=-3.854(13)e-4 V/bit S_min=10.8576 dof=14
caldac[4] gain=-8.307(13)e-4 V/bit S_min=8.58177 dof=14
caldac[5] gain=-7.72(12)e-5 V/bit S_min=1.54466 dof=14
caldac[8] gain=-7.5(13)e-6 V/bit S_min=1.18891 dof=14
caldac[9] gain=-8.304(13)e-4 V/bit S_min=6.92968 dof=14
ao 0, unipolar zero offset, low gain
reading 4.517(91)e-3, target 0
caldac[4] gain=-8.220(13)e-4 V/bit S_min=5.60513 dof=14
caldac[6] gain=-8.206(13)e-4 V/bit S_min=4.67072 dof=14
caldac[8] gain=-7.7(13)e-6 V/bit S_min=1.12487 dof=14
caldac[10] gain=-3.89(13)e-5 V/bit S_min=0.630333 dof=14
ao 0, unipolar high, low gain
reading 8.998178(94), target 9.00122
caldac[2] gain=-8.696(13)e-4 V/bit S_min=21.11 dof=14
caldac[4] gain=-8.306(13)e-4 V/bit S_min=8.20445 dof=14
caldac[6] gain=-8.285(13)e-4 V/bit S_min=9.41694 dof=14
caldac[8] gain=-7.3(12)e-6 V/bit S_min=0.649785 dof=14
caldac[10] gain=-1.082(12)e-4 V/bit S_min=3.77244 dof=14
caldac[14] gain=-1.725(13)e-4 V/bit S_min=7.76038 dof=14
ao 0, unipolar linearity (low), low gain
reading 1.004574(92), target 1.00122
caldac[2] gain=-9.74(13)e-5 V/bit S_min=11.644 dof=14
caldac[4] gain=-8.297(13)e-4 V/bit S_min=14.2519 dof=14
caldac[6] gain=-8.282(13)e-4 V/bit S_min=13.1882 dof=14
caldac[8] gain=-7.6(13)e-6 V/bit S_min=1.5583 dof=14
caldac[10] gain=-7.81(13)e-5 V/bit S_min=3.53179 dof=14
caldac[14] gain=-1.93(13)e-5 V/bit S_min=0.695582 dof=14
ao 0, unipolar linearity (mid), low gain
reading 5.002237(97), target 5.00122
caldac[2] gain=-4.789(13)e-4 V/bit S_min=9.26933 dof=14
caldac[4] gain=-8.241(13)e-4 V/bit S_min=12.7887 dof=14
caldac[6] gain=-8.222(13)e-4 V/bit S_min=13.3707 dof=14
caldac[8] gain=-7.2(12)e-6 V/bit S_min=0.820318 dof=14
caldac[10] gain=-6.01(13)e-5 V/bit S_min=12.6011 dof=14
caldac[14] gain=-9.51(13)e-5 V/bit S_min=11.5341 dof=14
ao 1, unipolar zero offset, low gain
reading 3.673(92)e-3, target 0
caldac[1] gain=-3.90(13)e-5 V/bit S_min=0.898529 dof=14
caldac[4] gain=-8.222(13)e-4 V/bit S_min=8.9096 dof=14
caldac[8] gain=-7.5(13)e-6 V/bit S_min=0.573907 dof=14
caldac[9] gain=-8.220(13)e-4 V/bit S_min=5.66687 dof=14
ao 1, unipolar high, low gain
reading 8.995975(92), target 9.00122
caldac[1] gain=-1.097(13)e-4 V/bit S_min=4.59593 dof=14
caldac[2] gain=-8.699(13)e-4 V/bit S_min=23.7598 dof=14
caldac[4] gain=-8.296(13)e-4 V/bit S_min=4.42104 dof=14
caldac[5] gain=-1.742(13)e-4 V/bit S_min=10.673 dof=14
caldac[8] gain=-7.6(12)e-6 V/bit S_min=1.10875 dof=14
caldac[9] gain=-8.301(13)e-4 V/bit S_min=3.08184 dof=14
ao 1, unipolar linearity (low), low gain
reading 1.003038(95), target 1.00122
caldac[1] gain=-7.71(13)e-5 V/bit S_min=1.97239 dof=14
caldac[2] gain=-9.60(13)e-5 V/bit S_min=10.7653 dof=14
caldac[4] gain=-8.299(13)e-4 V/bit S_min=15.7106 dof=14
caldac[5] gain=-2.02(13)e-5 V/bit S_min=0.804385 dof=14
caldac[8] gain=-7.4(13)e-6 V/bit S_min=0.446103 dof=14
caldac[9] gain=-8.298(13)e-4 V/bit S_min=13.3296 dof=14
ao 1, unipolar linearity (mid), low gain
reading 5.00087(11), target 5.00122
caldac[1] gain=-6.17(13)e-5 V/bit S_min=9.44247 dof=14
caldac[2] gain=-4.787(13)e-4 V/bit S_min=8.72787 dof=14
caldac[4] gain=-8.241(13)e-4 V/bit S_min=7.07434 dof=14
caldac[5] gain=-9.65(13)e-5 V/bit S_min=8.65336 dof=14
caldac[8] gain=-7.8(14)e-6 V/bit S_min=0.326692 dof=14
caldac[9] gain=-8.247(13)e-4 V/bit S_min=6.85389 dof=14
Failed to apply calibration for subdevice 0, channel 0, range 0, aref 0

that's all folks.
Thanks for answer
JuanPi

>From: Frank Mori Hess <fmhess_at_users.sourceforge.net>
>To: comedi_at_comedi.org
>Subject: Re: Ugly output when calibrating NI_ATMIO_64E_3
>Date: Sun, 29 Aug 2004 18:07:29 -0400
>
>-----BEGIN PGP SIGNED MESSAGE-----
>Hash: SHA1
>
>On Friday 27 August 2004 04:01 pm, Juan Pablo Carbajal wrote:
> >
> > WARNING: unknown eeprom address for reference voltage
> > correction.  This might be fixable if you send us an eeprom dump
> > (see the demo/eeprom_dump program).
> > Warning: device may not be not fully calibrated due to insufficient
> > information.
> > Please file a bug report at https://bugs.comedi.org/ and attach this
> > output. This output will also allow comedi_calibrate to execute more
> > quickly in the future.
> > Forcing option: --verbose
> > Forcing options: --reset --dump --no-calibrate --no-results
> > Id: comedi_calibrate.c,v 1.92 2004/03/29 01:34:15 fmhess Exp
> > Driver name: ni_atmio
> > Device name: at-mio-64e-3
> > Id: ni.c,v 1.128 2004/07/24 21:27:05 fmhess Exp
> > Comedi version: 0.7.68
> >
> > I don´t know what to do...
> > Should I file a bug report at https://bugs.comedi.org/ ?
>
>That's all you get from comedi_calibrate?  The interesting part should have
>come after the ouput you sent.
>
> >
> > Well another problem I have is that when I run ao_waveform from the
> > comedilib/demo directory
> > i get only one command execution... then everything gets stuck!!
> >
> > Any clue?
>
>You need an interrupt to run commands.  Pass the interrupt level to
>comedi_config, after the base address and delimited by a comma.  Or, don't
>use isapnptools and let the driver configure your board (you would need
>the current comedi cvs for that to work though).
>
>- --
>Frank
>
>-----BEGIN PGP SIGNATURE-----
>Version: GnuPG v1.2.4 (GNU/Linux)
>
>iD8DBQFBMlOh5vihyNWuA4URArtvAJ0SVXMvk4yReaNOJ9ItyDCPXPPD5wCfTHlM
>1jOa8cq/SIkG7/b0OX9mNGI=
>=BNjR
>-----END PGP SIGNATURE-----
>
>_______________________________________________
>comedi mailing list
>comedi_at_comedi.org
>https://cvs.comedi.org/cgi-bin/mailman/listinfo/comedi

_________________________________________________________________
Charla con tus amigos en línea mediante MSN Messenger: 
http://messenger.latam.msn.com/