- From: Daniel Nilsson <daniel_at_oden.homeip.net>
- Date: Thu, 7 Oct 2004 22:51:36 -0400
On Thu, Oct 07, 2004 at 09:21:56PM -0400, Frank Mori Hess wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On Thursday 07 October 2004 10:58 am, Matthew A Swabey wrote: > > > root_at_pro:~# comedi_calibrate --calibrate --reset -f /dev/comedi0 > > eeprom reference lsb=202 msb=255 > > resulting reference voltage: 4.99995 > > Warning: device may not be fully calibrated due to insufficient > > information. Please file a bug report at ....... > > Forcing option: --verbose > > Forcing option: --reset --dump --calibrate --results > > Id: comedi_calibrate.c,v 1.89 2003/08/08 17_at_38_at_59 fmhess Exp > > Driver name: ni_atmio > > Device name: at-mio-16e-10 > > Id: ni.c,v 1.98 2003/08/02 03:20:22 fmhess Exp > > Comedi version: 0.7.68 > > ai, bipolar zero offset, low gain > > reading 5.63(92)e-4, target 0 > > etc etc etc > > > > Any thoughs? > > The "etc etc etc" is the part we need to see to support the board. Please > send the complete output of comedi_calibrate. Also, you will need to use > comedi-0.7.69 since the caldac type has been changed in the driver. > Frank, I believe you already help me add support for this card, see: https://cvs.comedi.org/cgi-bin/bugzilla/show_bug.cgi?id=89 It worked fine for me using the CVS version. -- Daniel Nilsson
Received on 2004-10-08Z01:51:36