Re: using comedi_config with a AT-MIO-16E-10

On Saturday 23 July 2005 01:41 am, walt wrote:
> FWIW, I am running both an NI AT-MIO-16DE-10 & an AT-MIO-16XE-50 & the
> comedi_config statement for both requires an address assigned to the
> card, for example
>
> /usr/local/sbin/comedi_config /dev/comedi0 ni_atmio 0x200
>
> ISA cards (which use ISAPNP -- plug&play) are different from PCI cards
> in this respect.
>
> I am using SuSE rather than Redhat, so I don't know how Redhat
> configures PNP, but I have the PNP configure statement in
> /etc/isapnp.conf
>
> That file assigns the address used by the ISA card.
>
> Walt

The driver supports isapnp configuration, we just need to know the device 
id for your board.  If you provide your isapnp.conf file, that should be 
sufficient.  Actually, the xe-50 (id NIC2700) should work already if it 
hasn't already been activated by pnptools.

-- 
Frank