Fwd: Ni M-series support

Where's that register map.  I have a 6220 card and am in some need to
attempt to get this to work in comedi.

-Matt Kubilus

On 12/11/05, Frank Mori Hess <fmhess_at_speakeasy.net> wrote:
>
>
> I've got the beginnings of m series support in cvs now.  I need pci device
> ids (run lspci -v) from anyone with an m-series board though.  After using
> the id to add an appropriate entry to the board array, the driver may work
>
> for AI/AO, but the digital io stuff definitely isn't working yet.  I
> encourage anyone with an m-series board and the interest to try and take
> the driver the last 10 yards to get it working.  I'll look into bug
> reports but it's likely to be slow going as I don't currently have access
> to an m-series board.  Of particular interest are the
> m_series_stc_writew(), m_series_stc_writel(), and m_series_stc_readw()
> functions in ni_pcimio.c which are called through the stc_writew(), etc.
> function pointers.  Also, the board's reg_type should be set to
> ni_reg_m_series.
>
> --
> Frank
>
>
>
>


--
Don't be a pioneeer.  A pioneer is the guy with the arrow through his
chest.  -- John J. Rakos

--
Don't be a pioneeer.  A pioneer is the guy with the arrow through his
chest.  -- John J. Rakos