Digital input in NI 6220

    Hello everybody.

    Has anybody used the P1.0 to P1.7 or the P2.0 to P2.7 digital
input/output channels of a NI 6220 board? We are able to configure the 8
first digital channels P0.0 to P0.7 of this board the same way we did
with an E-Series board, but we cannot read/write the other 16 ones.

    Also, when using the comedi_soft_calibrate command, there appear 3
different digital IO subdevices (2, 5 and 8) with 32, 16 and 8 channels
each one. This board has only 24 DIO channels, so is there something
wrong with the driver? Which are the meanings of these 3 different
digital IO subdevices? Which is the correct one to choose to configure
the real 24 digital lines that the board has?

    Some help would be appreciated, thanks!!!

-- 
Jordi Blanch Carles
Unidad de Ensayo y Control

ENCOPIM S.L.
C/. del Parc, 5 (nave 13)
P.I. Els Pinetons
E-08291 RIPOLLET (Barcelona)
Tel: (+34) 935 94 23 47
Fax: (+34) 935 94 64 15

==========================================================
La información contenida en la presente transmisión es confidencial y su
uso únicamente está permitido a su(s) destinatario(s). Si Ud. no es la
persona destinataria de la presente transmisión, rogamos nos lo
comunique de manera inmediata por teléfono (+34 935 942 347) y destruya
cualquier copia de la misma (tanto digitales como en papel).

The information contained in this transmission is confidential and is
intended only for the use of the addressee(s). If you are not the
designated recipient of this transmission, please advise us immediately
by telephone (+34 935 942 347) and destroy any copies (digital and
paper).
======================================================