Nope, Im using 2.6.20.1 as 2.6.21 still wont boot without a kernel panic.
On 6/6/07, Bernd Porr <BerndPorr_at_f2s.com> wrote:
>
> You've compiled with 2.6.21. Haven't you?
>
> /Bernd
> --
> www: http://www.berndporr.me.uk/
> http://www.linux-usb-daq.co.uk/
> Mobile: +44 (0)7840 340069
> Work: +44 (0)141 330 5237
> University of Glasgow
> Department of Electronics & Electrical Engineering
> Room 519, Rankine Building, Oakfield Avenue,
> Glasgow, G12 8LT
>
>
> ---------- Forwarded message ----------
> From: Michael Mestre <michael.mestre_at_free.fr>
> To: comedi_at_comedi.org
> Date: Wed, 06 Jun 2007 10:58:04 +0200
> Subject: comedi-0.7.73 compilation problem on gentoo, kernel 2.6.20
> Hi,
> I have been trying to compile comedi-0.7.73 on a newly-installed gentoo
> x86 system with the latest kernel (linux-2.6.20-gentoo-r8), without
> success. The kernel sources are the ones I used to build my kernel.
> Configure generates a Makefile, but make fails after a few lines. It
> complains about not being able to find an include file which is
> obviously there, and in the include path (linux/config.h)
> Has anyone had the same problem before ?
> On the contrary, comedilib-0.7.22 compiles without any problems..
>
> I've included the Makefile, the output from 'configure' and the output
> from 'make'
> Thanks in advance for your help !
> Michael
>
> # Makefile.in generated by automake 1.9.5 from Makefile.am.
> # Makefile. Generated from Makefile.in by configure.
>
> # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
> # 2003, 2004, 2005 Free Software Foundation, Inc.
> # This Makefile.in is free software; the Free Software Foundation
> # gives unlimited permission to copy and/or distribute it,
> # with or without modifications, as long as this notice is preserved.
>
> # This program is distributed in the hope that it will be useful,
> # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
> # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
> # PARTICULAR PURPOSE.
>
>
> srcdir = .
> top_srcdir = .
>
> pkgdatadir = $(datadir)/comedi
> pkglibdir = $(libdir)/comedi
> pkgincludedir = $(includedir)/comedi
> top_builddir = .
> am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
> INSTALL = /usr/bin/install -c
> install_sh_DATA = $(install_sh) -c -m 644
> install_sh_PROGRAM = $(install_sh) -c
> install_sh_SCRIPT = $(install_sh) -c
> INSTALL_HEADER = $(INSTALL_DATA)
> transform = $(program_transform_name)
> NORMAL_INSTALL = :
> PRE_INSTALL = :
> POST_INSTALL = :
> NORMAL_UNINSTALL = :
> PRE_UNINSTALL = :
> POST_UNINSTALL = :
> build_triplet = i686-pc-linux-gnu
> host_triplet = i686-pc-linux-gnu
> target_triplet = i686-pc-linux-gnu
> DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
> $(srcdir)/Makefile.in $(srcdir)/config.h.in \
> $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
> TODO compile config.guess config.sub depcomp install-sh \
> missing
> subdir = .
> ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
> am__aclocal_m4_deps = $(top_srcdir)/m4/as-linux.m4 \
> $(top_srcdir)/m4/as-modtool.m4 $(top_srcdir)/m4/rtai.m4 \
> $(top_srcdir)/m4/rtlinux.m4 $(top_srcdir)/configure.ac
> am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
> $(ACLOCAL_M4)
> am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
> configure.lineno configure.status.lineno
> mkinstalldirs = $(install_sh) -d
> CONFIG_HEADER = config.h
> CONFIG_CLEAN_FILES =
> SOURCES =
> DIST_SOURCES =
> RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
> html-recursive info-recursive install-data-recursive \
> install-exec-recursive install-info-recursive \
> install-recursive installcheck-recursive installdirs-recursive \
> pdf-recursive ps-recursive uninstall-info-recursive \
> uninstall-recursive
> ETAGS = etags
> CTAGS = ctags
> DIST_SUBDIRS = $(SUBDIRS)
> DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
> distdir = $(PACKAGE)-$(VERSION)
> top_distdir = $(distdir)
> am__remove_distdir = \
> { test ! -d $(distdir) \
> || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
> && rm -fr $(distdir); }; }
> DIST_ARCHIVES = $(distdir).tar.gz
> GZIP_ENV = --best
> distuninstallcheck_listfiles = find . -type f -print
> distcleancheck_listfiles = find . -type f -print
> ACLOCAL = ${SHELL} /home/manip/Downloads/comedi-0.7.73/missing --run
> aclocal-1.9
> AMDEP_FALSE = #
> AMDEP_TRUE =
> AMTAR = ${SHELL} /home/manip/Downloads/comedi-0.7.73/missing --run tar
> AUTOCONF = ${SHELL} /home/manip/Downloads/comedi-0.7.73/missing --run
> autoconf
> AUTOHEADER = ${SHELL} /home/manip/Downloads/comedi-0.7.73/missing --run
> autoheader
> AUTOMAKE = ${SHELL} /home/manip/Downloads/comedi-0.7.73/missing --run
> automake-1.9
> AWK = gawk
> CC = gcc -m32
> CCDEPMODE = depmode=gcc3
> CFLAGS = -g -O2
> COMEDI_CFLAGS = -I$(top_srcdir)/include/ -DKBUILD_MODNAME=$(shell
> basename $_at_ .o | sed 's/\(.*\)_ko.*/\1/g') -DKBUILD_BASENAME=$(shell
> basename $< .c)
> CONFIG_ADEOS_FALSE =
> CONFIG_ADEOS_TRUE = #
> CONFIG_COMEDI_RT_FALSE =
> CONFIG_COMEDI_RT_TRUE = #
> CONFIG_IPIPE_FALSE =
> CONFIG_IPIPE_TRUE = #
> CONFIG_ISA_FALSE =
> CONFIG_ISA_TRUE = #
> CONFIG_KBUILD_FALSE = #
> CONFIG_KBUILD_TRUE =
> CONFIG_PCI_FALSE = #
> CONFIG_PCI_TRUE =
> CONFIG_PCMCIA_FALSE =
> CONFIG_PCMCIA_TRUE = #
> CONFIG_RTHAL_FALSE =
> CONFIG_RTHAL_TRUE = #
> CONFIG_RTLINUX_FALSE =
> CONFIG_RTLINUX_TRUE = #
> CONFIG_USB_FALSE = #
> CONFIG_USB_TRUE =
> CPPFLAGS =
> CYGPATH_W = echo
> DEFS = -DHAVE_CONFIG_H
> DEPDIR = .deps
> DEPMOD = /sbin/depmod
> DISTCHECK_CONFIGURE_FLAGS = --with-modulesdir=\$$\(prefix\)/modules
> ECHO_C =
> ECHO_N = -n
> ECHO_T =
> EGREP = grep -E
> EXEEXT =
> INSTALL_DATA = ${INSTALL} -m 644
> INSTALL_PROGRAM = ${INSTALL}
> INSTALL_SCRIPT = ${INSTALL}
> INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
> LDFLAGS =
> LIBOBJS =
> LIBS =
> LINUX_AFLAGS = -D__ASSEMBLY__ -DCONFIG_AS_CFI=1
> -I/lib/modules/2.6.20-gentoo-r8/build/include/asm-i386/mach-generic
> -I/lib/modules/2.6.20-gentoo-r8/build/include/asm-i386/mach-default
> LINUX_ARCH = i386
> LINUX_ARFLAGS =
> LINUX_AS = as --32
> LINUX_CC = gcc -m32
> LINUX_CFLAGS = -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs
> -fno-strict-aliasing -fno-common -Os -pipe -msoft-float -mregparm=3
> -mpreferred-stack-boundary=2 -march=i686 -mtune=pentium4 -ffreestanding
> -maccumulate-outgoing-args -DCONFIG_AS_CFI=1
> -I/lib/modules/2.6.20-gentoo-r8/build/include/asm-i386/mach-generic
> -I/lib/modules/2.6.20-gentoo-r8/build/include/asm-i386/mach-default
> -fomit-frame-pointer -fno-stack-protector -Wdeclaration-after-statement
> -Wno-pointer-sign -D__KERNEL__ -I/lib/modules/2.6.20-gentoo-r8/build/include
> -include /lib/modules/2.6.20-gentoo-r8/build/include/linux/autoconf.h
> -DMODULE
> LINUX_CONFIG = /lib/modules/2.6.20-gentoo-r8/build/.config
> LINUX_CROSS_COMPILE =
> LINUX_DIR = /lib/modules/2.6.20-gentoo-r8/build
> LINUX_KERNELRELEASE = 2.6.20-gentoo-r8
> LINUX_KERNEL_TYPE = smp
> LINUX_LD = ld -m elf_i386 -m elf_i386 -r
> LINUX_LDFLAGS =
> LINUX_MODPOST = /lib/modules/2.6.20-gentoo-r8/build/scripts/mod/modpost
> LINUX_MODULE_EXT = .ko
> LINUX_MODULE_STYLE = 2.6.6
> LTLIBOBJS =
> MAINT = #
> MAINTAINER_MODE_FALSE =
> MAINTAINER_MODE_TRUE = #
> MAKEINFO = ${SHELL} /home/manip/Downloads/comedi-0.7.73/missing --run
> makeinfo
> OBJEXT = o
> PACKAGE = comedi
> PACKAGE_BUGREPORT =
> PACKAGE_NAME =
> PACKAGE_STRING =
> PACKAGE_TARNAME =
> PACKAGE_VERSION =
> PATH_SEPARATOR = :
> RPM = yes
> RTAI_CFLAGS =
> RTLINUX_CFLAGS =
> SET_MAKE =
> SHELL = /bin/sh
> STRIP = /usr/bin/strip
> VERSION = 0.7.73
> ac_ct_CC = gcc
> ac_ct_STRIP =
> ac_pt_STRIP = /usr/bin/strip
> am__fastdepCC_FALSE = #
> am__fastdepCC_TRUE =
> am__include = include
> am__leading_dot = .
> am__quote =
> am__tar = ${AMTAR} chof - "$$tardir"
> am__untar = ${AMTAR} xf -
> bindir = ${exec_prefix}/bin
> build = i686-pc-linux-gnu
> build_alias =
> build_cpu = i686
> build_os = linux-gnu
> build_vendor = pc
> datadir = ${prefix}/share
> exec_prefix = ${prefix}
> host = i686-pc-linux-gnu
> host_alias =
> host_cpu = i686
> host_os = linux-gnu
> host_vendor = pc
> includedir = ${prefix}/include
> infodir = ${prefix}/info
> install_sh = /home/manip/Downloads/comedi-0.7.73/install-sh
> libdir = ${exec_prefix}/lib
> libexecdir = ${exec_prefix}/libexec
> localstatedir = ${prefix}/var
> mandir = ${prefix}/man
> mkdir_p = mkdir -p --
> modulePROGRAMS_INSTALL = $(top_builddir)/modtool --install
> moduledir = $(modulesdir)/$(PACKAGE)
> modulesdeveldir = /lib/modules/2.6.20-gentoo-r8/build
> modulesdir = /lib/modules/2.6.20-gentoo-r8
> oldincludedir = /usr/include
> prefix = /
> program_transform_name = s,x,x,
> sbindir = ${exec_prefix}/sbin
> sharedstatedir = ${prefix}/com
> sysconfdir = ${prefix}/etc
> target = i686-pc-linux-gnu
> target_alias =
> target_cpu = i686
> target_os = linux-gnu
> target_vendor = pc
> SUBDIRS = comedi
> EXTRA_DIST = autogen.sh \
> Contributors \
> m4/as-linux.m4 \
> m4/as-modtool.m4 \
> m4/rtai.m4 \
> m4/rtlinux.m4 \
> Documentation/comedi/command \
> Documentation/comedi/FAQ \
> Documentation/comedi/notes/atmio_notes \
> Documentation/comedi/notes/README \
> Documentation/comedi/notes/boards \
> Documentation/comedi/notes/regmaps \
> Documentation/comedi/notes/testing \
> Documentation/comedi/Hardware_Driver.HOWTO \
> Documentation/comedi/counter-spec \
> Documentation/comedi/hacks \
> Documentation/comedi/insn_config \
> Documentation/comedi/pci.ids \
> Documentation/comedi/redhat-notes \
> Documentation/comedi/drivers.txt \
> Documentation/comedi/devices.txt \
> include/asm/pgtable.h \
> include/asm/div64.h \
> include/asm/dma.h \
> include/asm/page.h \
> include/asm/uaccess.h \
> include/asm/types.h \
> include/asm/semaphore.h \
> include/linux/comedi.h \
> include/linux/comedi_rt.h \
> include/linux/comedidev.h \
> include/linux/comedilib.h \
> include/linux/compiler.h \
> include/linux/config.h \
> include/linux/delay.h \
> include/linux/devfs_fs_kernel.h \
> include/linux/device.h \
> include/linux/interrupt.h \
> include/linux/isapnp.h \
> include/linux/kernel.h \
> include/linux/kref.h \
> include/linux/mm.h \
> include/linux/mod_devicetable.h \
> include/linux/module.h \
> include/linux/moduleparam.h \
> include/linux/pci.h \
> include/linux/pci_ids.h \
> include/linux/pnp.h \
> include/linux/sched.h \
> include/linux/time.h \
> include/linux/types.h \
> include/linux/usb.h \
> include/linux/version.h \
> include/linux/wrapper.h \
> include/pcmcia/ds.h \
> scripts/check_driver \
> scripts/check_cmdtest \
> scripts/check_kernel \
> scripts/call_trace \
> scripts/doc_devlist \
> scripts/dump_doc
>
> ACLOCAL_AMFLAGS = -I m4
> DISTCLEANFILES = modtool
> all: config.h
> $(MAKE) $(AM_MAKEFLAGS) all-recursive
>
> .SUFFIXES:
> am--refresh:
> _at_:
> $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps)
> _at_for dep in $?; do \
> case '$(am__configure_deps)' in \
> *$$dep*) \
> echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
> cd $(srcdir) && $(AUTOMAKE) --gnu \
> && exit 0; \
> exit 1;; \
> esac; \
> done; \
> echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
> cd $(top_srcdir) && \
> $(AUTOMAKE) --gnu Makefile
> .PRECIOUS: Makefile
> Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
> _at_case '$?' in \
> *config.status*) \
> echo ' $(SHELL) ./config.status'; \
> $(SHELL) ./config.status;; \
> *) \
> echo ' cd $(top_builddir) && $(SHELL) ./config.status $_at_
> $(am__depfiles_maybe)'; \
> cd $(top_builddir) && $(SHELL) ./config.status $_at_
> $(am__depfiles_maybe);; \
> esac;
>
> $(top_builddir)/config.status: $(top_srcdir)/configure
> $(CONFIG_STATUS_DEPENDENCIES)
> $(SHELL) ./config.status --recheck
>
> $(top_srcdir)/configure: # $(am__configure_deps)
> cd $(srcdir) && $(AUTOCONF)
> $(ACLOCAL_M4): # $(am__aclocal_m4_deps)
> cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
>
> config.h: stamp-h1
> _at_if test ! -f $_at_; then \
> rm -f stamp-h1; \
> $(MAKE) stamp-h1; \
> else :; fi
>
> stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
> _at_rm -f stamp-h1
> cd $(top_builddir) && $(SHELL) ./config.status config.h
> $(srcdir)/config.h.in: # $(am__configure_deps)
> cd $(top_srcdir) && $(AUTOHEADER)
> rm -f stamp-h1
> touch $_at_
>
> distclean-hdr:
> -rm -f config.h stamp-h1
> uninstall-info-am:
>
> # This directory's subdirectories are mostly independent; you can cd
> # into them and run `make' without going through this Makefile.
> # To change the values of `make' variables: instead of editing Makefiles,
> # (1) if the variable is set in `config.status', edit `config.status'
> # (which will cause the Makefiles to be regenerated when you run
> `make');
> # (2) otherwise, pass the desired values on the `make' command line.
> $(RECURSIVE_TARGETS):
> _at_failcom='exit 1'; \
> for f in x $$MAKEFLAGS; do \
> case $$f in \
> *=* | --[!k]*);; \
> *k*) failcom='fail=yes';; \
> esac; \
> done; \
> dot_seen=no; \
> target=`echo $_at_ | sed s/-recursive//`; \
> list='$(SUBDIRS)'; for subdir in $$list; do \
> echo "Making $$target in $$subdir"; \
> if test "$$subdir" = "."; then \
> dot_seen=yes; \
> local_target="$$target-am"; \
> else \
> local_target="$$target"; \
> fi; \
> (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
> || eval $$failcom; \
> done; \
> if test "$$dot_seen" = "no"; then \
> $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
> fi; test -z "$$fail"
>
> mostlyclean-recursive clean-recursive distclean-recursive \
> maintainer-clean-recursive:
> _at_failcom='exit 1'; \
> for f in x $$MAKEFLAGS; do \
> case $$f in \
> *=* | --[!k]*);; \
> *k*) failcom='fail=yes';; \
> esac; \
> done; \
> dot_seen=no; \
> case "$_at_" in \
> distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
> *) list='$(SUBDIRS)' ;; \
> esac; \
> rev=''; for subdir in $$list; do \
> if test "$$subdir" = "."; then :; else \
> rev="$$subdir $$rev"; \
> fi; \
> done; \
> rev="$$rev ."; \
> target=`echo $_at_ | sed s/-recursive//`; \
> for subdir in $$rev; do \
> echo "Making $$target in $$subdir"; \
> if test "$$subdir" = "."; then \
> local_target="$$target-am"; \
> else \
> local_target="$$target"; \
> fi; \
> (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
> || eval $$failcom; \
> done && test -z "$$fail"
> tags-recursive:
> list='$(SUBDIRS)'; for subdir in $$list; do \
> test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
> tags); \
> done
> ctags-recursive:
> list='$(SUBDIRS)'; for subdir in $$list; do \
> test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
> ctags); \
> done
>
> ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
> list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
> unique=`for i in $$list; do \
> if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi;
> \
> done | \
> $(AWK) ' { files[$$0] = 1; } \
> END { for (i in files) print i; }'`; \
> mkid -fID $$unique
> tags: TAGS
>
> TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in$(TAGS_DEPENDENCIES) \
> $(TAGS_FILES) $(LISP)
> tags=; \
> here=`pwd`; \
> if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
> include_option=--etags-include; \
> empty_fix=.; \
> else \
> include_option=--include; \
> empty_fix=; \
> fi; \
> list='$(SUBDIRS)'; for subdir in $$list; do \
> if test "$$subdir" = .; then :; else \
> test ! -f $$subdir/TAGS || \
> tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
> fi; \
> done; \
> list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
> unique=`for i in $$list; do \
> if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi;
> \
> done | \
> $(AWK) ' { files[$$0] = 1; } \
> END { for (i in files) print i; }'`; \
> if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
> test -n "$$unique" || unique=$$empty_fix; \
> $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
> $$tags $$unique; \
> fi
> ctags: CTAGS
> CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in$(TAGS_DEPENDENCIES) \
> $(TAGS_FILES) $(LISP)
> tags=; \
> here=`pwd`; \
> list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
> unique=`for i in $$list; do \
> if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi;
> \
> done | \
> $(AWK) ' { files[$$0] = 1; } \
> END { for (i in files) print i; }'`; \
> test -z "$(CTAGS_ARGS)$$tags$$unique" \
> || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
> $$tags $$unique
>
> GTAGS:
> here=`$(am__cd) $(top_builddir) && pwd` \
> && cd $(top_srcdir) \
> && gtags -i $(GTAGS_ARGS) $$here
>
> distclean-tags:
> -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
>
> distdir: $(DISTFILES)
> $(am__remove_distdir)
> mkdir $(distdir)
> $(mkdir_p) $(distdir)/Documentation/comedi
> $(distdir)/Documentation/comedi/notes $(distdir)/include/asm
> $(distdir)/include/linux $(distdir)/include/pcmcia $(distdir)/m4
> $(distdir)/scripts
> _at_srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
> topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
> list='$(DISTFILES)'; for file in $$list; do \
> case $$file in \
> $(srcdir)/*) file=`echo "$$file" | sed
> "s|^$$srcdirstrip/||"`;; \
> $(top_srcdir)/*) file=`echo "$$file" | sed
> "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
> esac; \
> if test -f $$file || test -d $$file; then d=.; else d=$(srcdir);
> fi; \
> dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
> if test "$$dir" != "$$file" && test "$$dir" != "."; then \
> dir="/$$dir"; \
> $(mkdir_p) "$(distdir)$$dir"; \
> else \
> dir=''; \
> fi; \
> if test -d $$d/$$file; then \
> if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
> cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
> fi; \
> cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
> else \
> test -f $(distdir)/$$file \
> || cp -p $$d/$$file $(distdir)/$$file \
> || exit 1; \
> fi; \
> done
> list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
> if test "$$subdir" = .; then :; else \
> test -d "$(distdir)/$$subdir" \
> || $(mkdir_p) "$(distdir)/$$subdir" \
> || exit 1; \
> distdir=`$(am__cd) $(distdir) && pwd`; \
> top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
> (cd $$subdir && \
> $(MAKE) $(AM_MAKEFLAGS) \
> top_distdir="$$top_distdir" \
> distdir="$$distdir/$$subdir" \
> distdir) \
> || exit 1; \
> fi; \
> done
> -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
> ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
> ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
> ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {}
> {} \; \
> || chmod -R a+r $(distdir)
> dist-gzip: distdir
> tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c
> >$(distdir).tar.gz
> $(am__remove_distdir)
>
> dist-bzip2: distdir
> tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
> $(am__remove_distdir)
>
> dist-tarZ: distdir
> tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
> $(am__remove_distdir)
>
> dist-shar: distdir
> shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
> $(am__remove_distdir)
>
> dist-zip: distdir
> -rm -f $(distdir).zip
> zip -rq $(distdir).zip $(distdir)
> $(am__remove_distdir)
>
> dist dist-all: distdir
> tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c
> >$(distdir).tar.gz
> $(am__remove_distdir)
>
> # This target untars the dist file and tries a VPATH configuration. Then
> # it guarantees that the distribution is self-contained by making another
> # tarfile.
> distcheck: dist
> case '$(DIST_ARCHIVES)' in \
> *.tar.gz*) \
> GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
> *.tar.bz2*) \
> bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
> *.tar.Z*) \
> uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
> *.shar.gz*) \
> GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
> *.zip*) \
> unzip $(distdir).zip ;;\
> esac
> chmod -R a-w $(distdir); chmod a+w $(distdir)
> mkdir $(distdir)/_build
> mkdir $(distdir)/_inst
> chmod a-w $(distdir)
> dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e
> 's,^[^:\\/]:[\\/],/,'` \
> && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
> && cd $(distdir)/_build \
> && ../configure --srcdir=.. --prefix="$$dc_install_base" \
> $(DISTCHECK_CONFIGURE_FLAGS) \
> && $(MAKE) $(AM_MAKEFLAGS) \
> && $(MAKE) $(AM_MAKEFLAGS) dvi \
> && $(MAKE) $(AM_MAKEFLAGS) check \
> && $(MAKE) $(AM_MAKEFLAGS) install \
> && $(MAKE) $(AM_MAKEFLAGS) installcheck \
> && $(MAKE) $(AM_MAKEFLAGS) uninstall \
> && $(MAKE) $(AM_MAKEFLAGS)
> distuninstallcheck_dir="$$dc_install_base" \
> distuninstallcheck \
> && chmod -R a-w "$$dc_install_base" \
> && ({ \
> (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
> && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
> && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall
> \
> && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
> distuninstallcheck_dir="$$dc_destdir"
> distuninstallcheck; \
> } || { rm -rf "$$dc_destdir"; exit 1; }) \
> && rm -rf "$$dc_destdir" \
> && $(MAKE) $(AM_MAKEFLAGS) dist \
> && rm -rf $(DIST_ARCHIVES) \
> && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
> $(am__remove_distdir)
> _at_(echo "$(distdir) archives ready for distribution: "; \
> list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
> sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
> distuninstallcheck:
> _at_cd $(distuninstallcheck_dir) \
> && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
> || { echo "ERROR: files left after uninstall:" ; \
> if test -n "$(DESTDIR)"; then \
> echo " (check DESTDIR support)"; \
> fi ; \
> $(distuninstallcheck_listfiles) ; \
> exit 1; } >&2
> distcleancheck: distclean
> _at_if test '$(srcdir)' = . ; then \
> echo "ERROR: distcleancheck can only run from a VPATH build" ; \
> exit 1 ; \
> fi
> _at_test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
> || { echo "ERROR: files left in build directory after
> distclean:" ; \
> $(distcleancheck_listfiles) ; \
> exit 1; } >&2
> check-am: all-am
> check: check-recursive
> all-am: Makefile config.h
> installdirs: installdirs-recursive
> installdirs-am:
> install: install-recursive
> install-exec: install-exec-recursive
> install-data: install-data-recursive
> uninstall: uninstall-recursive
>
> install-am: all-am
> _at_$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
>
> installcheck: installcheck-recursive
> install-strip:
> $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)"
> \
> install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)"
> INSTALL_STRIP_FLAG=-s \
> `test -z '$(STRIP)' || \
> echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
> mostlyclean-generic:
>
> clean-generic:
>
> distclean-generic:
> -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
> -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
>
> maintainer-clean-generic:
> _at_echo "This command is intended for maintainers to use"
> _at_echo "it deletes files that may require special tools to
> rebuild."
> clean: clean-recursive
>
> clean-am: clean-generic mostlyclean-am
>
> distclean: distclean-recursive
> -rm -f $(am__CONFIG_DISTCLEAN_FILES)
> -rm -f Makefile
> distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
>
> dvi: dvi-recursive
>
> dvi-am:
>
> html: html-recursive
>
> info: info-recursive
>
> info-am:
>
> install-data-am:
> _at_$(NORMAL_INSTALL)
> $(MAKE) $(AM_MAKEFLAGS) install-data-hook
>
> install-exec-am:
>
> install-info: install-info-recursive
>
> install-man:
>
> installcheck-am:
>
> maintainer-clean: maintainer-clean-recursive
> -rm -f $(am__CONFIG_DISTCLEAN_FILES)
> -rm -rf $(top_srcdir)/autom4te.cache
> -rm -f Makefile
> maintainer-clean-am: distclean-am maintainer-clean-generic
>
> mostlyclean: mostlyclean-recursive
>
> mostlyclean-am: mostlyclean-generic
>
> pdf: pdf-recursive
>
> pdf-am:
>
> ps: ps-recursive
>
> ps-am:
>
> uninstall-am: uninstall-info-am
>
> uninstall-info: uninstall-info-recursive
>
> .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
> check-am clean clean-generic clean-recursive ctags \
> ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \
> dist-tarZ dist-zip distcheck distclean distclean-generic \
> distclean-hdr distclean-recursive distclean-tags \
> distcleancheck distdir distuninstallcheck dvi dvi-am html \
> html-am info info-am install install-am install-data \
> install-data-am install-data-hook install-exec install-exec-am \
> install-info install-info-am install-man install-strip \
> installcheck installcheck-am installdirs installdirs-am \
> maintainer-clean maintainer-clean-generic \
> maintainer-clean-recursive mostlyclean mostlyclean-generic \
> mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
> uninstall uninstall-am uninstall-info-am
>
>
> dev:
> -for i in `seq 0 15`; do \
> mknod -m 666 /dev/comedi$$i c 98 $$i \
> ; \
> done;
>
> Documentation/comedi/drivers.txt Documentation/comedi/devices.txt:
> (for each in comedi/drivers/*.c;do scripts/dump_doc $$each;done
> >Documentation/comedi/drivers.txt)
> scripts/doc_devlist Documentation/comedi/drivers.txt | sort
> >Documentation/comedi/devices.txt
>
> moo:
> (cd comedi/drivers;for each in *.c;do ../../scripts/check_driver
> $$each;done >../../drivers.check)
> (grep '^.:' drivers.check >drivers.summary)
>
> install-data-hook:
> _at_echo "***"
> _at_echo "***"
> _at_echo "*** Don't forget to run 'depmod -a'"
> _at_echo "***"
> _at_echo "***"
> # Tell versions [3.59,3.63) of GNU make to not export all variables.
> # Otherwise a system limit (for SysV at least) may be exceeded.
> .NOEXPORT:
>
>
>
--
Colin