- From: Emanuel Marques <emarques_at_gerailp.fr>
- Date: Mon, 18 Jun 2007 17:56:52 +0200
Hello Said,
Thank you for the reply, it worked fine
and I had a error-free compilation of comedi.
But...
I am trying to install my pci board now,
I included the "rtai-inode" file as my FC6 is udev-enabled,
I found my board in the drivers directory, it is the pci-6221_37pin in
the ni_pcimio.c .
The lspci -vvxxx gives me :
"""""
06:00.0 Class ff00: National Instruments Unknown device 71bc
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 90005000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at 90004000 (32-bit, non-prefetchable) [size=4K]
00: 93 10 bc 71 17 00 80 02 00 00 00 ff 10 20 00 00
10: 00 50 00 90 00 40 00 90 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00
"""""
So I made the command :
/usr/local/sbin/comedi_config /dev/comedi0 pci-6221_37pin 0x06,9
the answer is : "device not configured"
I do not have the file /proc/comedi . Is it normal ?
===============
$PATH
/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/usr/realtime/bin:/sbin:/usr/local/sbin:/usr/sbin:/home/emarques/bin
===============
and when I write dmesg|grep ni :
"8255: Unknown symbol range_unipolar5
ni_pcimio: Unknown symbol cfc_write_array_to_buffer
ni_pcimio: Unknown symbol mite_release_channel"
Do you have any clues for this ?
Thanks again!
Regards,
Emanuel
On Mon, 18 Jun 2007 09:23:11 +0200, said bounaceur wrote
> Hi, you most do --disable-pcmcia option in compilation
>
> > error at compilation :
> > /usr/local/src/comedi/comedi/drivers/cb_das16_cs.c:79: error: expected
> > specifier-qualifier-list before ‘dev_link_t’
GIP-GERAILP
16 bis Avenue de la cote d'or
94114 ARCUEIL CEDEX
France
STANDARD : +33 1 42 31 98 91
FAX: +33 1 42 31 97 47
Received on 2007-06-18Z14:56:52