

	National Instruments PCI-MIO E series



These boards are almost identical to the AT-MIO E series,
except that they use the PCI bus instead of ISA (i.e., AT).
See the atmio-E notes for more information about these boards.


The following boards should be identified correctly:
	
	pci-mio-16xe-50
	pci-mio-16xe-10
	pci-mio-16e-1
	pci-mio-16e-4
	pci-6031e

These are not:
	
	pci-6032e
	pci-6033e
	pci-6071e	(same as pci-mio-64e-1?)
	pci-6023e
	pci-6024e
	pci-6025e
	pci-6052e
	pci-6110e
	pci-6111e
	pci-6040e
	pci-6041e

When you configure a board that is not recognized, the driver
will tell you that there is an unknown National Instruments
PCI board in your machine and tell you it's ID number.  If
you email me the board name and ID, I'll send you a patch
so that the driver will identify the board.




