RTAI 24.1.10?

Hello
    Im a newbie with comedi and Im having some problems getting my NI 
DAQ AI 16XE 50 to work. Im using RTAI 24.1.10 . Is this version of RTAI 
known to have some problems with Comedi? I basically installed comedi on 
RTAI and on inserting the card I only get 1 beep..and the log message 
indicates that an unsupported device was found....National Instruments - 
AI-16XE-50. So i guess the card is fine. A problem with comedi and 
24.1.10 perhaps?

Muks


Evan Carey wrote:

>Ah Ha!  
>
>I was trying to output a square wave as a test and for some reason the
>values 0 and 4095 both come out as ~0V instead of -10V and +10V.  I kept
>trying the same values (i.e. 0 and 4095) with demo/outp so I was
>thinking something was not working.  I tried 2047 and viola the
>oscilloscope showed 10V.  2048 shows -10V.
>
>So why is it coming out that way?  There is only one range for the
>subdevice and it is supposed to be -10V to +10V.
>
>I'm using comedi-0.7.65 and comedilib-0.7.19.
>
>-Evan
>
>-----Original Message-----
>From: GECOS [mailto:fmhess_at_mfire.com] On Behalf Of Frank Mori Hess
>Sent: Friday, December 06, 2002 11:30 AM
>To: Evan Carey; 'David Schleef'
>Cc: comedi_at_comedi.org
>Subject: Re: PXI-6713 ID is 0x2b80
>
>-----BEGIN PGP SIGNED MESSAGE-----
>Hash: SHA1
>
>On Thursday 05 December 2002 05:02 pm, Evan Carey wrote:
>  
>
>>I'm assuming that's bad?  I'm able to run demo/info on the device and
>>    
>>
>I
>  
>
>>get back useful information but I can't seem to get demo/outp to work.
>>    
>>
>
>What problem are you seeing?  Are you using 0.7.66?
>
>- -- 
>Frank
>
>-----BEGIN PGP SIGNATURE-----
>Version: GnuPG v1.0.6 (GNU/Linux)
>Comment: For info see http://www.gnupg.org
>
>iD8DBQE98N6B5vihyNWuA4URAqB4AJ9KlsHFT0wMGME+wo0CAkstSGJXUACfadiy
>ekJiq73T10EjLdrQPJu//Uw=
>=Ip3s
>-----END PGP SIGNATURE-----
>
>
>_______________________________________________
>comedi mailing list
>comedi_at_comedi.org
>https://cvs.comedi.org/cgi-bin/mailman/listinfo/comedi
>  
>

Received on 2002-12-07Z19:25:28