RE: PXI-6713 ID is 0x2b80

From: Evan Carey <ecarey_at_zyvex.com> · Date: Mon, 9 Dec 2002 11:51:38 -0600

I added the PXI-6713 device ID to comedi-0.7.66 as I did to my copy of
comedi-0.7.65 but it doesn't seem to work at all now.  My other
ni_pcimio device works (PXI-6052e) but the PXI-6713 doesn't.  The diff
of the two versions of ni_pcimio.c show quite a bit of changes and being
a comedi newbie I am I'm not sure where to start to trace what's (not)
happening (or more likely, what I'm doing wrong).  Any suggestions?
Thanks,
Evan

-----Original Message-----
From: comedi-admin_at_comedi.org [mailto:comedi-admin_at_comedi.org] On Behalf
Of Frank Mori Hess
Sent: Saturday, December 07, 2002 4:51 PM
To: Evan Carey
Cc: comedi_at_comedi.org
Subject: Re: PXI-6713 ID is 0x2b80

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Friday 06 December 2002 01:13 pm, Evan Carey wrote:
> thinking something was not working.  I tried 2047 and viola the
> oscilloscope showed 10V.  2048 shows -10V.
>
> So why is it coming out that way?  There is only one range for the
> subdevice and it is supposed to be -10V to +10V.
>
> I'm using comedi-0.7.65 and comedilib-0.7.19.
>

Use 0.7.66, it should work properly.  Waveform output may even work as
well.

- -- 
Frank

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQE98ns75vihyNWuA4URAgdWAJ0Qv2vIyYGhaonK2T0u57AGCftYYgCeLuk3
hqdYaEwECCYsjik5L9gJGBg=
=LwwO
-----END PGP SIGNATURE-----

_______________________________________________
comedi mailing list
comedi_at_comedi.org
https://cvs.comedi.org/cgi-bin/mailman/listinfo/comedi