- From: Bernd Porr <BerndPorr_at_f2s.com>
- Date: Sun, 28 Aug 2005 23:15:51 +0100
Hi Per,
sorry. These are counters. Not timers.
You can read the status of the counters via subdevice 3:
bp1_at_snoopy:~/usb/comedilib-0.7.22/demo$ ./inp -s 3
48660
Regards
/Bernd
www: http://www.berndporr.me.uk/
http://www.linux-usb-daq.co.uk/
Mobile: +44 (0)7840 340069
Work: +44 (0)141 330 5237
University of Glasgow
Department of Electronics & Electrical Engineering
Room 519, Rankine Building, Oakfield Avenue,
Glasgow, G12 8LT
Per Arlock wrote:
> Hi Bernd,
>
> I have accomplished a timed output with the USBDUX from the model in ao_waveform program and
> I got my usbdux to output streaming output. Using the whole buffers in a way limits the flexibility I would have if I would like to vary timing between different output-pulses from the board. The shortest possible output seems to be a buffer of approximately 60 ms.
> Instead I would like to use the usbdux timers and when they have reached a specified count I would like to end or change the analog output to a different level.
>
> So, I would like to be able to use the timers of the board to directly arm and load and also read the clock out. I have tried to reset (pin 2) and toggled the up/down pin (3) and watched the clock out (pin 4)
> but did not see anything. Where could I find more information on how to use/program and read the timers?
> I have also asked this question in the comedi-mailing list but Tao suggested your name as well!
> Hope for some information!
>
> Best regards
>
> Per Arlock
>
Received on 2005-08-28Z21:15:51