- From: <leif_at_adelow.dynu.com>
- Date: Tue, 24 Jan 2006 16:03:18 +0100 (CET)
Hi,
I have a problem getting ni_atmio up and running due to my lack of
knowledge ...
card (cat /proc/isapnp): ...Card 1 'NIC2700:National Instruments,
AT-MIO-16XE-50' PnP version 1.0 ...
comedi version: 0.7.70
comedilib version: 0.7.22
linux version: 2.4.18-3
I've compiled and loaded modules (/sbin/lsmod):
...
ni_atmio 30336 0
8255 3616 0 [ni_atmio]
comedi_fc 1920 0 [ni_atmio]
comedi 25744 0 [ni_atmio 8255 comedi_fc]
...
but /usr/local/sbin/comedi_config /dev/comedi0 ni_atmio yields (tail
/var/log/messages):
...
Jan 24 15:45:50 adelow kernel: ni_atmio: kernel does not have isapnp
support available
...
kernel .config file reveals: ...CONFIG_ISAPNP=y ...
Do I really need to have ISAPNP as a module to get this working?
How do I obtain config options (I/OBASE,IRQ ...) for comedi_config?
I'm posting full /proc/isapnp below ...:
Best Regards,
Leif Adelow
-----
Card 1 'NIC2700:National Instruments, AT-MIO-16XE-50' PnP version 1.0
Logical device 0 'NIC2700:Unknown'
Supported registers 0x2
Device is not active
Resources 0
Priority acceptable
Port 0x20-0xffe0, align 0x1f, size 0x20, 16-bit address decoding
IRQ 3,4,5,7,10,11,12,15 High-Edge
DMA 5,6,7 16-bit word-count compatible
DMA 5,6,7 16-bit word-count compatible
Alternate resources 0:1
Priority acceptable
Port 0x20-0xffe0, align 0x1f, size 0x20, 16-bit address decoding
IRQ 3,4,5,7,10,11,12,15 High-Edge
DMA 5,6,7 16-bit word-count compatible
Alternate resources 0:2
Priority acceptable
Port 0x20-0xffe0, align 0x1f, size 0x20, 16-bit address decoding
IRQ 3,4,5,7,10,11,12,15 High-Edge
Alternate resources 0:3
Priority acceptable
Port 0x20-0xffe0, align 0x1f, size 0x20, 16-bit address decoding
IRQ <none> High-Edge
Logical device 1 'NIC2700:Unknown'
Device is not active
Resources 0
Priority acceptable
DMA 5,6,7 16-bit word-count compatible
Alternate resources 0:1
Priority acceptable
DMA <none> 16-bit word-count compatible
Received on 2006-01-24Z15:03:18