Re: still anyone using ISA?

Solved (scanned over avail I/O ports) and found one suitable for
/etc/isapnp.conf file ...

Best Regards

Leif Adelow



> Hi,
> I have a problem getting ni_atmio up and running due to my lack of
> knowledge ...
>
> card (cat /proc/isapnp): ...Card 1 'NIC2700:National Instruments,
> AT-MIO-16XE-50' PnP version 1.0 ...
>
> comedi version: 0.7.70
> comedilib version: 0.7.22
> linux version: 2.4.18-3
>
> I've compiled and loaded modules (/sbin/lsmod):
> ...
> ni_atmio               30336   0
> 8255                    3616   0 [ni_atmio]
> comedi_fc               1920   0 [ni_atmio]
> comedi                 25744   0 [ni_atmio 8255 comedi_fc]
> ...
> but /usr/local/sbin/comedi_config /dev/comedi0 ni_atmio yields (tail
> /var/log/messages):
> ...
> Jan 24 15:45:50 adelow kernel: ni_atmio: kernel does not have isapnp
> support available
> ...
>
> kernel .config file reveals: ...CONFIG_ISAPNP=y ...
> Do I really need to have ISAPNP as a module to get this working?
> How do I obtain config options (I/OBASE,IRQ ...) for comedi_config?
> I'm posting full /proc/isapnp below ...:
>
> Best Regards,
>
> Leif Adelow
> -----
> Card 1 'NIC2700:National Instruments, AT-MIO-16XE-50' PnP version 1.0
>   Logical device 0 'NIC2700:Unknown'
>     Supported registers 0x2
>     Device is not active
>     Resources 0
>       Priority acceptable
>       Port 0x20-0xffe0, align 0x1f, size 0x20, 16-bit address decoding
>       IRQ 3,4,5,7,10,11,12,15 High-Edge
>       DMA 5,6,7 16-bit word-count compatible
>       DMA 5,6,7 16-bit word-count compatible
>       Alternate resources 0:1
>         Priority acceptable
>         Port 0x20-0xffe0, align 0x1f, size 0x20, 16-bit address decoding
>         IRQ 3,4,5,7,10,11,12,15 High-Edge
>         DMA 5,6,7 16-bit word-count compatible
>       Alternate resources 0:2
>         Priority acceptable
>         Port 0x20-0xffe0, align 0x1f, size 0x20, 16-bit address decoding
>         IRQ 3,4,5,7,10,11,12,15 High-Edge
>       Alternate resources 0:3
>         Priority acceptable
>         Port 0x20-0xffe0, align 0x1f, size 0x20, 16-bit address decoding
>         IRQ <none> High-Edge
>   Logical device 1 'NIC2700:Unknown'
>     Device is not active
>     Resources 0
>       Priority acceptable
>       DMA 5,6,7 16-bit word-count compatible
>       Alternate resources 0:1
>         Priority acceptable
>         DMA <none> 16-bit word-count compatible
>
>
> _______________________________________________
> comedi mailing list
> comedi_at_comedi.org
> https://cvs.comedi.org/cgi-bin/mailman/listinfo/comedi
>

Received on 2006-01-24Z16:52:33